Page 1 of 1

WebDav Help

Posted: Wed Jun 07, 2017 9:09 am
by tianyanhui
I installed the ce version, but there are some problems with the webdav.
When I visited wendav via HTTP, enter the correct user name and password, the page displays “not found”, and the log has some error messages, please help
Image

Re: WebDav Help

Posted: Fri Jun 09, 2017 2:57 pm
by vanmark
We had a similiar problem trying to access the WebDAV.

For us, we had found that you need to change a setting in each workstation registry.

In registry, go to:

HKLM\SYSTEM\CurrentControlSet\Services\WebClient\Parameters.

Locate BasicAuthLevel and review the value. (The default is 1).

We had to change the value to a 2. Once changed, reboot the workstation.

Note that the possible values you can assign to this new registry entry are:
0 - Basic authentication disabled
1 - Basic authentication enabled for Secure Sockets Layer (SSL) shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

Re: WebDav Help

Posted: Fri Jun 09, 2017 3:08 pm
by agaspa
Hi tianyanhui,
what version of LogicalDOC CE (Community edition) did you install?

Your problem seems to be related to the fact that the system can not find or can not create the repository folder of the documents
/store/HEAD

So you should check the configuration of storage 1 and that you're executing LogicalDOC with the right permissions (user)

Re: WebDav Help

Posted: Wed Jul 05, 2017 10:56 am
by tianyanhui
version: logicaldoc 7.6.4

Re: WebDav Help

Posted: Mon Aug 07, 2017 9:28 am
by agaspa
There is a dedicated web-page in the LogicalDOC's Wiki that explain some of the settings required to configure properly the WebDAV system with Windows http://wiki.logicaldoc.com/wiki/WebDAV_Interface